Aviom SB4 - Manual (Page 20)

Connecting an ASI A-Net Systems Interface
The Pro64 Series ASI A-Net Systems Interface provides up to four streams of 16-channel Pro16 data from
a Pro64 audio network. Connecting the four synchronous Pro16 outputs on the ASI to an SB4 allows the
streams to be merged when the SB4 is connected to a D800 A-Net Distributor.
The four Pro16 outputs on the ASI are labeled the same as the SB4: 1-16, 17-32, 33-48, and 49-64. While
the ports could be connected in any order, it is simplest just to match the port names on each device.
From
A-Net Bridge
(front panel)
Four Pro16 outputs on the ASI connect to the SB4.
Once the ASI ports are connected to the SB4, simply connect the SB4 A-N
et
B
rIdge
output to the A-N
et
B
rIdge
I
N
port on the rear panel of the D800 as seen in the diagram above.
13 SB4 S yStem
B
ridge
U
Ser
g
Uide