Capresso Impressa S Avantgarde Series - Manual (Page 25)

16.8 AUTO-ON / UNIT ON
You can set a time at which the machine turns itself on. This way
you don’t have to wait for the machine to warm up. Just run one
10 second rinse cycle and you can have your first cup of coffee.
Please note: Auto-on will only work if you set the actual time
and the main power switch is turned on (when the small red light
in the On/Off switch is illuminated, you know that the main
power is on).
SELECT PRODUCT
• Push and hold the Dial. FILTER
• Turn the Dial until the display shows UNIT ON -.-
• Push the Dial.
• Turn the dial to set the hours and push the Dial to confirm.
• Turn the Dial to set the minutes and push the dial to confirm.
The 3-tone melody confirms the new setting. (example)
UNIT ON 6:45 AM .
• Turn the Dial to EXIT .
• Push the Dial to get back to SELECT PRODUCT .
Please note: If you turn the machine off with the main power
switch (Fig. 1b) or if you unplug the machine or experience a
power outage, the actual time will not be retained. The next time
you turn the machine on, the display will first show
TIME --.-- .
Turn the Rotary dial to set the hours, then push the Rotary dial,
Turn the Rotary dial again to set the minutes and push to con-
firm. Now the AUTO-ON time will be automatically restored.
16.9 AUTO-OFF / OFF AFTER
Your machine is pre-set to turn itself off 5 hours after last use.
You change the auto-off interval between
1 ⁄
2
hour and 14 hours or
you can set the machine not to turn off itself at all.
Recommendations: If you use the machine only in the morning,
change the auto-off to 2 hours. If you use the machine all day
long,leave the auto/off as is. This way the machine is always
ready and you don’t have to turn it on and wait for it to warm up
again.
SELECT PRODUCT
• Push and hold the Dial. FILTER
• Turn the Dial until the display shows OFF AFTER .
• Push and turn the Dial until the desired setting appears.
• Push the Dial to confirm. The 3-tone melody confirms the new
setting. (example) OFF AFTER 2 HRS .
• Turn the Dial to EXIT .
• Push the Dial to get back to SELECT PRODUCT .
16.10 LANGUAGE / LANGUAGE
You can change the display from English to French, Portuguese,
German, Italian, Dutch or Spanish.
SELECT PRODUCT
• Push and hold the Dial. FILTER
• Turn the Dial until the display shows LANGUAGE .
• Push and turn the Dial until the desired language appears. The
3-tone melody confirms the new setting.
• Turn the Dial to EXIT (in the language you choose)
• Push the Dial to get back to SELECT PRODUCT (in the
language you choose).
16.11 DISPLAY / DISPLAY
This function lets you select the time format AM/PM or 24HR
format and the volume either in ounces OZ or milliliters ML .
SELECT PRODUCT
24.