Capresso Impressa S Avantgarde Series - Manual (Page 12)

• Remove any foreign particles (small stones) from coffee beans.
• Let frozen beans thaw for 3 to 4 hours before pouring them
into the bean container.
5. FACTORY SETTINGS
Each machine leaves the factory with the settings described
below. To change any of these settings (chapter 16).
• All coffee buttons are set to temperature
HIGH .
• 1-CUP Espresso button (Fig. 2,C) 2 oz./ STRONG .
• 2-CUP Espresso button (Fig. 2,F) 2 oz. per cup / STRONG .
• 1-CUP Coffee button (Fig. 2,D) 5 oz./ STRONG .
• 2-CUP Coffee button (Fig. 2,G) 5 oz. per cup / STRONG .
Other settings: Each of the four buttons above can be set
from 1 oz. to 8 oz. of coffee per cup.
• A La Carte button (Fig. 3A,N) 7 oz.
• Hot water (
WATER PORTION ): 5 oz. Other settings: The hot
water release can be set from 1 oz. to 15 oz.
• 5-hour auto shut-off. Other settings: manual shut off, auto
shut-off from 1 /
2
hour to 15 hours after last use.
• Water hardness setting: level 2.
Other settings: “blank”, 1, 3, 4
• Filter: FILTER NO (Clearyl Water Care Cartridge: not installed)
Other Settings: FILTER YES (chapter 14a).
• Coffee temperature: HIGH for all coffee buttons
Other setting: NORMAL
• Steam portion: 14 seconds
Other settings: 3 to 120 seconds in 1 second intervals
• Language: English.
Other settings: French, Portuguese, German, Italian,
Dutch, Spanish
• Display: AM/PM and OZ. Other settings 24 hour and ML
(milliliters)
• Economy Mode: Off
Other settings: Economy 1, Economy 2
• Time: --. (not set)
Other setting: Set a time
• Unit On: --. (not set)
Other setting: Set a time that the unit turns on automatically.
(Requires that you first set a time.)
6. PREPARING THE MACHINE FOR THE FIRST TIME
• Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
• DO NOT install the Clearyl water filter now. (chapter 14)
• Make sure the machine sits on an even, flat surface and the
drawer and used coffee container are inserted (Fig. 1).
• Plug-in machine.
6a. FILLING THE WATER TANK
Please note: Only use fresh, cold water. Never fill water tank
with carbonated water, milk or any other liquid.
• Remove the water tank, rinse and fill with fresh, cold water.
• Replace water tank and make sure that it engages securely.
6b. FILLING THE BEAN CONTAINER
Please note: To insure that your conical burr grinder will work
for a long time, do not use it with any kind of coated or flavored
beans (all coating and flavors contain sugar or sugar substances).
Such coating can damage the burrs. Using such beans voids the
warranty. Have your coffee store grind the sugar coated beans
11.