Aviom A-16D Pro - Manual (Page 19)

12 A-16D P
ro
A-N
et
D
istributor
u
ser
G
uiDe
A-Net Input
When using the A‑16D Pro A‑Net Distributor, daisy chain linking of Personal
Mixers can be eliminated. Up to eight Personal Mixers (A‑16II or A‑16R) can be
connected directly to the A‑Net outputs on the front of the A‑16D Pro.
To connect the A‑16D Pro, connect a Cat‑5e cable from the A-N
et
o
ut
on the
Pro16 input module to the A-N
et
i
N
on the A‑16D Pro A‑Net Distributor.
As with all A‑Net compatible devices, the cable length between compatible
components can be up to 500 feet (150 meters) long.
A-Net Outputs
The eight A‑Net outputs on the A‑16D Pro A‑Net Distributor carry the same
16‑channel digital signal. You can use any A‑Net output to connect a Personal
Mixer or Pro16 output module.
To connect a Personal Mixer:
Connect a standard Cat‑5e cable from one • A-N
et
o
ut
on
the A‑16D Pro A‑Net Distributor to the A-N
et
i
N
jack on the
Personal Mixer.
DC power is supplied automatically to the first connected
•
Personal Mixer—no external DC power supply is required.
Connect additional Personal Mixers using Cat‑5e cables
•
from an available A‑Net Out on the A‑16D Pro A‑Net
Distributor to the A‑Net Input on the Mixer.
A-Net A-Net and DC Power Output
Thru In 1 2 3 4 5 6 7 8
P
RO
A-Net
Power
Phones/Lines Out DC Power
18-24 VDC
Regulated
500 mA
T-Left
R-Right
S-Ground
Out A-Net In
From A-Net input module
Connect A-Net Out on the A-16D Pro to A-Net In on a Personal Mixer.
Once the Personal Mixer is connected to the A‑Net signal chain, any audio
patched to the A‑Net input module can be mixed in the Personal Mixer.
Refer to the User Guide that came with your Personal Mixer for additional
information about using the mixing features of the Pro16 Monitor Mixing
System.