Radio status information – AvaLAN Wireless AW900F User Manual
Page 15
AW900F | AW900F-PAIR
User’s Manual
PAGE 15
Technical Support (650) 384-0000
www.avalanwireless.com
Radio Status Information
The Login or Admin pages of the radio’s built-in web browser interface provide many useful pieces of
information that let you know how well the wireless link is working:
Top of Web Page
Version
Current version of the radio’s Ethernet interface.
MAC Address
Radio’s hardware MAC Address.
Ethernet
Status of Ethernet connection: 10 Mbps or 100 Mbps, full or half du-
plex, connected or disconnected.
Uptime
Total time radio has been active since last power cycle or hardware
reset.
Device Information
Device Type
Access Point (master) or Subscriber Unit (client)
# of Subscriber Units
For Access Point only, up to 4 permitted.
Subscriber ID
For Subscriber Unit only, the ID selected for this radio.
Current TX Power
The output power from 0dBm to 30dBm
RF Status
Connected or Searching
Product
900f
Radio Firmware Version
32
Radio Firmware Build
519
Radio Address
XX.XX.XX (ex. 00.17.5d)
Statistics
Radio RSSI
Received Signal Strength Indicator. The radios operate best with this
value between -30 and -95 dBm
Radio Total Packets
# of Ethernet packets received since last reset.
Radio Failed Packets
# of packets unsuccessfully transmitted.
Radio Passed Packets
# of packets successfully transmitted.
Radio Broadcast Packets
Traffic simultaneously addressed to all devices on the network.
Radio Unicast Packets
Traffic sent to a single destination.
Radio Average TX Size
Average bytes per packet transmitted.
Radio Average RX Size
Average bytes per packet received.