Talkswitch M600I - Manual (Page 72)

72 Control panel M600i
This is the Internet version of the user guide. © Print only for private use.
More menu options
Select network – start a search for a
network.
New search – search for the next network
in the preferred list.
Preferred list tab
You can set a list of preferred networks. Your
phone will select the network with the highest
priority that can be found.
More menu options
Add network – select a network from the
list and set priority.
Delete network – delete the highlighted
network.
Filter networks – set the type of networks
that should be shown in the list ( GSM , 3G
or Both ).
Note: Your operator may not allow you to
access all available networks.
USB
Select Tools > Control panel > Connections >
USB to display the USB settings of your
phone.
USB functionality options
Phone mode – allows synchronization,
backup, restore, file transfer, and modem
usage.
File transfer – allows transfer of music
files and images to and from the phone
using computer applications like Sony
Disc2Phone and Adobe Photoshop Album
SE. Also allows using your phone as a
general storage device for a connected
computer.
Mark Allow USB charging to enable phone
battery charging over USB. It is recommended
not to use this function when connecting to an
un-powered USB hub or to a device only using
battery power.
Note: During data transfer over USB, do not
change the USB settings or disconnect the
phone from the other device, as this may cause
a data loss.
Device
Backlight
You can select how the display and keyboard
backlight should behave for handheld use and
when the phone is in a car holder. The lower
the brightness you choose, the longer the
battery will last before it needs charging. Set
the car holder levels low enough so that you
sustain natural night vision.
Select Tools > Control panel > Device >
Backlight to make the settings.