Talkswitch M600I - Manual (Page 22)

22 Phone M600i
This is the Internet version of the user guide. © Print only for private use.
contact you want to call. See Voice control on
page 23.
Making an emergency call
You can make an emergency call as follows:
• Enter the emergency number from the
keyboard. Press the Jog Dial or select
Call .
• Select a pre-defined SOS number in the
More menu. Press the Jog Dial or select
Call .
Usually no SIM card or PIN code is required
for emergency calls, but this is something you
need to check with your operator.
Receiving a call
Handling an incoming call
You can handle an incoming phone call in
several ways:
• Answer – select Yes or answer by voice
control.
• Send busy – reject the call by pressing
on the side or by using voice control.
• Reject with SMS – reject the call by
sending an SMS text message to the caller.
Select
More > Send SMS. See Reject with
SMS on page 68.
• Reject and create a reminder – select No
to reject the call and choose whether you
want to create a reminder to follow up the
call at a later date. See Flag Call on
page 67.
Options during or after a call
You can find the following options in the More
menu:
• Mute microphone – disconnect the
microphone after you have answered.
• Speakerphone on – transfer the sound to
the speakerphone during a call.
• Show contact – display the corresponding
entry in Contacts, or access DTMF tones
sequences stored in Contacts.
• Add call/Hold call/Retrieve call – add a
call during a call, put the active call on
hold, or retrieve a call.
• Transfer sound – transfer a call to a
Bluetooth or a regular headset, or to the
speakerphone. See Handsfree settings on
page 67.
• Create task – create a task in Tasks.
• Make note – make a note in Notes. (Call
data is automatically entered).
• Call voicemail – check the messages in
your voicemail box. See Voicemail on
page 69.
Handling two or more
calls
You can handle multiple calls at the same
time, as follows:
• Put an ongoing call on hold and start a
new one, or answer an incoming call.
• Start a conference call during an ongoing
call (operator-dependent).