ALFA NETWORK Bridge5-24 - Manual (Page 14)

14
WPA, WPA2, WPA-Auto, 802.1X; Default: Disabled)
O
PERATION
M
ODE
–
AP B
RIDGE
1) In this mode bridge your OUTDOOR BRIDGE to another Access Point.
2)
Network Name (SSID) — SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode — Select the security method and then configure the required
parameters. (Options: Disabled, Open, Shared, WEP-AUTO, WPA-PSK, WPA2-PSK,
WPA-PSK_WPA2-PSK, WPA, WPA2, WPA1_WPA2, 802.1X; Default: Disabled
O
PERATION
M
ODE
–
C
LIENT
R
OUTER
In the Client Router mode is also known as WISP. The OUTDOOR BRIDGE wireless
side is connected to the remote AP (Base-Station) as in Client Infrastructure mode.
Between the wireless and LAN is the IP sharing router function. This is used to
share Client Router connection. The WAN is on the wireless side.
2) Press Site Survey button and look for available wireless network then click on the
SSID that you attempt to connect to it; 5G is the SSID that we are going to