ALFA NETWORK AIP-W502 - Manual (Page 18)

Hardware Description
– 23 –
A 100BASE-TX RJ-45 port that can be attached to an Internet access
device, such as a DSL or Cable modem.
The Mini Broadband Router has one 100BASE-TX RJ-45 port that can be
attached directly to a PC or 10BASE-T/100BASE-TX LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or
hubs.
The Mini Broadband Router must be powered with its supplied power
adapter. Failure to do so results in voiding of any warrantly supplied with
the product. The power adapter automatically adjusts to any voltage
between 100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to
the unit. No voltage range settings are required.
Press the WPS button to automatically configure the Mini Broadband
Router with other WPS devices in the WLAN.
The Reset button is used to restore the factory default configuration. If you
hold down the button for 5 seconds or more, any configuration changes
you may have made are removed, and the factory default configuration is
restored to the Mini Broadband Router.
Figure 4: Bottom Panel
C
HAPTER
1 | I ntroduction
E
THERNET
WAN P
ORT
E THERNET LAN P ORT
P
OWER
C
ONNECTOR
WPS B
UTTON
R
ESET
B
UTTON
Reset Button