Clarion DB255 - Manual (Page 5)

7
English
DB255
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (Detachable Control Panel) case to
prevent scratches.
We recommend taking the DCP with you when
leaving the car.
3. Pull the DCP toward you and remove it.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
5. DCP (Detachable Control Panel)
CAUTION !
2. Press in the [OPEN] button.
∗ If the flip down panel does not open fully, gently
open it with your hand.
4. Close the HOLD FLAP.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it or
subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So close
the FLIP DOWN PANEL or remove the DCP
to store into the case.
• The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
CAUTION !
Be sure to close the HOLD FLAP for safety
when removing the DCP.
DCP
HOLD FLAP
DCP
2.
1.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
Removing the DCP
1. Press the [SRC] button for 1 second or longer
to switch off the power.