Softride 26249 Versa 2 bike rack - Manual

VERSA BIKE RACK INSTRUCTIONS
Important This bike rack is designed for use in a 2” or 1.25” receiver and designed to hold a maximum of two bikes. Do not
use this rack for anything other than carrying bicycles. Do not exceed your vehicle’s receiver load ratings for any
reason. This rack cannot be used on Class 1 vehicle receivers. Reference the instruction manual for proper use of
the rack.
Warning Check the tightness of bolts and nuts periodically as they may loosen slightly during normal use.
DO NOT drive the vehicle with the bike rack in the lowered position.
This rack CANNOT be mounted and used on the rear of trailers.
This rack MUST be removed from the vehicle before going through a car wash.
2 Adjustable Wrenches
Screw Driver
TOOLS REQUIRED PARTS INCLUDED
(A) Main Rack Assembly
(B) Hitch Lock with Keys
(C) 4 Bike Straps
(D) Hitch Lock Bolt With Lock Washer (5/8” for 2” Rack, ” for 1.25” Rack)
(E) 4mm and 5mm Allen Wrenches
(F) Hitch Assembly
(G) 1.25” Hitch Bar
(E)
(C)
(D)
(B)
(A)
(F)
Model #26249
1
(G)