Tape playback, Auto reverse – Panasonic RQV152 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note:
Be sure to have the set in an upright position when
you listen to AM broadcasts. If you use the radio in a
horizontal position, it may not function adequately.
TAPE PLAYBACK
1. Open the Cassette Compartment Cover with your
hand, insert a cassette, ('«o [¥])
2. Connect the included stereo earphones to the
rj Jack.
3. Set the SELECTOR Switch to “TAPE
4. Set the TAPE Selector according to the tape
used.
Cr02|MTLj: Metal and chromium type.
NOR: Normal type.
5. Press the PLAY Button and playback will begin.
6. Adjust the VOLUME Control.
7. To stop the playback, press the STOP Button.
■ Auto Reverse
During playback when the tape comes to the end of
its travel, the tape direction changes automatically to
start playing the opposite side of the tape.
•Tape direction can be reversed manually during
playback by the DIR Selector.