Panasonic RC-X260 - Manual (Page 15)

Beat proof selector
When an AM broadcast is recorded, the
beat proof selector on the back of the unit
can be used to reduce unwanted “beat”
signals (whistle) which are sometimes pre­
sent. Set the selector to whichever position
best reduces these “beat” signals.
Monitoring
The monitor system enables you to listen,
through the speakers or headphones, to
the sound as it is being recorded.
When recording from the radio, the sound
being recorded can be monitored through
the speakers or headphones.
The sound being recorded through the ex­
ternal sound source cannot be monitored.
How to record through an external
sound source--------------------------------
1
If it is necessary to adjust the volume level
of the sound being monitored, do so by
using the volume control.
Connect the microphone (not
included) to the microphone
jack.
(See page 7.)
2
Insert the cassette tape.
3
Press the record button.
Erasure of recording
I When recording, previously recorded sig-
^ nals on the tape will be erased automati­
cally.
To erase recordings without re-recording,
press the record button.
(Make no connection to the microphone
jack, and turn off the radio.)
15