Method, Blue back mode, Note – Panasonic TC-14ST15M User Manual
Page 16: Ch (channel) colour set mode, Child lock mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( Advanced Remote Control Operation)
FEATURES Menu Operation
Method
BLUE BACK Mode
When no picture signal is received, or the signal is
weak, the screen reverts to a blue background
colour and the sound is muted.
Disable this features to continue watching very
weak signals.
Blue background
colour if no input
picture signal or
input signal is weak.
Note :
If BLUE BACK Mode is set on while a VCR signal
is being viewed, selecting CUE or REVIEW may
cause the screen to revert to the blue background
colour. Disable this feature to view correctly.
CH (Channel) COLOUR SET mode.
Colour density varying between broadcast
channels can be adjusted to three levels for
each reception channel as follows:
STD'
HIGH
LOW
n
CHILD LOCK mode.
To child lock any channel, press the position left or
right button.
1) When channel is "LOCK", sound is muted and
screen becomes blue colour.
2) If any of the channels is CHILD LOCK, then
preset key at any panel will not woiir. If preset
key (Panel) is pressed, message" CHILD LOCK
ON" will appear.
3) Main power ON in child locked channel will
display "CHILD LOCK ON" on screen to remind
user that the Child lock is On and is in Child
locked channel.
4) Each channel has its own memory for channels
to be child locked.
15