Caution, Attachments, Ííl7iiyiliimen – Panasonic MC-V5710 User Manual
Page 7: Assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ííl7iiyiliiMEn
assembly
;
:
A
CAUTION
DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as It can be damaged by the agitator as it revolves.
ATTACHMENTS
Dusting
Brush —
jy
-Wand
Crevice
Tool
The attachments should be conveniently positioned on the side of the
cleaner for easy access. Assemble the hose and attachments to
the cleaner as follows:
Place the hose in back of the handle on the hose holder. Grasp
the end of the hose and push it down into the front slot of the tool
holder, twisting and pushing down over the short hose to
assure a good connection.
Hose-
Store
the wand in the round rear slot of the tool holder.
Insert the dusting brush into the top of the wand as shown.
Piace the crevice tool into the rectangular rear slot of the tool
holder.
Refer to the illustration in the PARTS tDENTiFICATION section
for correct attachment storage.
Ousting
Brush
Short
Hose
-Agitator
(Underneath)
-
7
-