To assemble cleaner, Warning, Attaching handlèto vacuum cmeanèr – Panasonic MC-V5710 User Manual

Page 6: Attaching handle to vacuum cleaner, Usingthe cord hook

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO ASSEMBLE CLEANER

WARNING

Electrical Shock Hazard.

DO NOT plug Into electrical supply until assembly Is complete. Failure to do so could
result in electrical shock or injury.

ATTACHING HANDLÈTO VACUUM CMEANÈR

The vacuum cleaner main body and handle are packed separately.

1. The handle screw has

been installed for shipping
purposes. Please remove

the screw before inserting
the handle. Insert the
handle as shown in the

illustration.

2. Insert the
screw that you
have removed. Be
sure the screw is

tightened, but not
overtightened.

3. There is a recessed area between
the upper cord hook base and the
handle that is designed to secure the
power cord during vacuuming.

Always push the power cord
down Into this recessed area
to help keep the power cord from

hanging near the nozzle and

being damaged by the agitator.

4. Loosely wrap the power cord
around the quick

release cord hook

and the lower cord
retainer. Secure the
plug head to the cord by
pushing the power cord into

the retainer on the plug head.

Retainer
(Plug Head)

>vS.

USINGTHE CORD HOOK

"'i

►i'l.

■

1. The upper cord hook has a

quick-release action. To

reiease the power cord, rotate

the hook downward and the
complete power cord will drop
off the hook for immediate
use.

2. DO NOT unplug the power
cord by pulling on the cord.
Grasp the plug head and pull
to unplug the vacuum clean
er.

Return the hook to the

upright position before

attempting to rewind the
cord.