Optional equipment connection & operation (cont.), Operation, Monitor out connection (ct-2786vyd oniy) – Panasonic CT-2786VYD User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Optional Equipment Connection & Operation (cont.)
Monitor Out Connection (CT-2786VYD oniy)
The Monitor Out terminals will output Audio and Video signals being displayed.
Operation
1. Make connections to the MONITOR OUT video BNC connector, also the MON ITOR OUT L and R audio terminals as
shown.
NOTE: The MONITOR OUT jacks will provide the same signals for monitoring or recording.The Monitor Out terminals
only operate when the Monitor is ON.
To Audio Amp (R)
To Audio Amp (L)
Terminals on Back of Monitor
OUTPUT
R------- AUDIO-------- L
VIDEO
AUTO 75 S2/ HIGH
INPUT
R------- AUDIO-------- L
■O’
VIDEO _
AUTO 75 U/HIGH
44
r tr
MONITOR OUT L and R audio
terminals cannot be used directly
with external speakers.
To Audio AMP Connection (CT-2786VYD only)
Connect to an external audio amp auxiliary input for monitoring sound through a stereo system.
Adjustment - When an audio amp is connected to MONITOR OUT L and R AUDIO terminals as shown above:
1. Select TV SPEAKERS “ON ” Mode. (Refer to the Audio Menu TV Speakers section.)
2. Set volume of audio amp to near minimum.
3. Adjust volume of TV to desired listening level.
4. Adjust volume of audio amp to match the level of TV.
5. Select TV SPEAKERS “OFF&VAO" Mode. (Refer to the Audio Menu TV Speakers section.)
6. Bass, Treble, Balance, Volume and Mute can now be controlled by the TV Remote Control.
NOTE: When Selecting TV SPEAKERS “OFF&FAO" Mode, the TV sound output is always at a constant level and cannot
be changed (Refer to the Audio Menu TV Speakers section).
-
10
-