Before requesting help, Problem remedy – Panasonic SOUND CHANGER KX-T4168-B User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before Requesting Help

Problem

Remedy

“OUT OF RANGE"

displayed and an alarm
tone sounds when you

press (TALK) or

(INTERCOM

key).

—You are too far from the base unit.

Move closer and try again.

—Place the handset on the base unit and

try again.

—Plug in the AC adaptor.
—Clean the charge contacts and charge

again.

The unit does not work.

—Check the connection (p. 10).

—Charge the battery fully.
—Clean the charge contacts and charge

again.

Static, sound cuts in/out,

fades. Interference from

other electrical units.

—Set the handset and the base unit

away from other electrical appliances.

—Move closer to the base unit.

—Extend the base unit antenna.
—Press (CHl to change the channel.

The handset does not ring.

—The ringer volume is set to OFF. Press

IVOLUME/RINGER] and select HIGH or

LOW using [Fl] or (F2]. You cannot

select it during a call with the handset.

The base unit does not ring.

—The RINGER selector is set to OFF.

Set to HIGH or LOW.

The handset display is

blank.

—The handset is in the battery saver

mode (p. 11

Press one of the function

keys to turn the display on.

The handset display is still

blank after pressing one of
the function keys.

—Charge the battery fully.

While using the

speakerphone, the calling
party complains that your

voice is hard to hear.

—Press (VOLUME) to decrease the

voice volume.