Picture in picture (pip) operation – Panasonic SUPERFLAT CT-27SF26 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

icture

(PIP) O

peration

Picture In Picture (PIP) Operation

With a VCR and Cable Box

This television includes a Picture In Picture (PIP) feature. A second video source

(VCR, Camcorder, etc.) is required to provide a second picture.

Connect your television to a VCR and Cable Box, as shown.

Note:

The Remote Control must be programmed with supplied codes to operate the VCR

and Cable Box. See Programming the Remote Control in the Remote Control Quick

Reference Guide.

Procedure

Press the PIP button on the Remote Control to display the PIP frame.

Note:

The PIP picture is the same as the main picture, initially.

To view a different picture in the PIP frame:

1. Press the TV/VIDEO button on the Remote Control to select the video PIP

source.

2. Verify the CABLE BOX and VCR are turned on and the VCR tuned to

Channel 3 or 4, depending on the VCR.

3. Choose channels for the PIP frame by pressing the CBL button on the

Remote Control and using the numeric keypad or CH up/down buttons.

4. Choose channels for the Main Picture by pressing the TV button on the

Remote Control and using the numeric keypad or CH up/down buttons.

The SWAP button switches the PIP and Main

Picture source. Press the RECALL button for PIP

and Main Picture source status, on screen.