Cabletron Systems 3T02-04 - Manual (Page 9)

Token Ring Switch Module User Guide Page 1-1
CHAPTER 1
INTRODUCTION
This manual is for system administrators responsible for configuring,
monitoring and maintaining the ATX. It should be used with the
ATX User
Guide and the ATX MIB User Guide . The contents of each chapter are
described below.
• Chapter 1, Introduction , provides general descriptions of the
modules.
• Chapter 2, Connecting to the Network , describes how to physically
attach the modules to a Token Ring network.
• Chapter 3, Configuring , discusses the software configuration options
for the modules.
• Chapter 4, Statistics , provides information on Token Ring port
statistics.
• Chapter 5, Diagnostics and Troubleshooting , discusses identifying
possible problems with the modules.
• Chapter 6, Adding/Swapping Modules , gives instructions for adding
and replacing Token Ring modules.
• Appendix A, Technical Specifications , lists the pertinent technical
information about the modules.
• Appendix B, Bridging Methods , discusses transparent, source
routing, and source routing transparent bridging.