Cabletron Systems 3T02-04 - Manual (Page 26)

Chapter 3: Configuring
Page 3-8 Token Ring Switch Module User Guide
To enable the default option for port 5, enter:
ATX> translate 5 ipx on
To change the default to ethernet2, and change the IPX option to
ethernet2 for ports 5 and 6.
ATX> translate 6 ipx ethernet2
To change the default to ethernet8022, and change the IPX option to
ethernet8022 for ports 5, 6, and 7.
ATX> translate 7 ipx ethernet8022
3.6.4 AppleTalk Translation
NOTE
All Token Ring ports that have IPX translation enabled should
always use the same option.
NOTE
AppleTalk Phase 1 does not exist on Token Ring and so is not a
concern here. Also, since the ATX does not have physical
LocalTalk connections, LocalTalk/LLAP is not a concern. Apple
Macintoshes may be attached directly to standard LANs or may
employ various LocalTalk-to-Ethernet routers to access LAN
internetworks.