Panasonic CT-20R13 - Manual (Page 10)

POW6r Button — Press the POWER button to turn
ON. Press again to turn OFF.
Control Operation
CH (Channel) Buttons
POWER
Vol (Volume) Buttons - Press the VOLUME
(VOL) LEFT or RIGHT button for desired listening level
(while On Screen Menus are not displayed).
Located On Remote Control
Increases
Volume Level
Mute Button — Press the MUTE button to quickly
reduce sound level (Mute will appear on screen). Press
again to restore sound.
MUTE
Helpful Hints:
* Helpful information will display On Screen
momentarily when Receiver is first turned on and
when the channel is changed.
• When using keyboard entry forchannels 10,11 and
12 in the CABLE mode there is a slight delay before
channel change because of the capability of tuning
cable channels 100 to 125.
Option 1.
Press the CHANNEL (CH) UP or DOWN button to
sequentially scan through programmed channels
(while On Screen Menus are not displayed).
Located On Remote Control
Selects Next
Higher Channel
Keyboard “0 through 9” Buttons
Option 2.
Press two digits on keyboard (Example press 0,
then 5 for channel 05). For channels over 99, press
three digits on keyboard.
Located On Remote Control
-
10
-