Panasonic RQ-E30V - Manual (Page 5)

RADIO
Concerning the hold function
This function prevents the unit from
operating even if one of the front panel
buttons is pressed in error. During hold state
88
.
To obtain good reception
Normally set the FM RECEPTION selector to “NOR". When there Is interference, set
the selector CITY. (This selector does not function for AM reception.)
FM;
AM:
Extend the headphones cord
When correctly tuned to
a station
88
Preset tuning
You can store each station separately
as follows. (Total: 20 stations)
MODE1: FM 1-5, AMI-5
MODE 2: FM 1-5, AM 1-5
We recommend that you use MODE 1
for daily use, and MODE 2 for travel.
■ Mode selecting
Press and hold »MODE for more
than 2 seconds. “0" (MODE 1) or “S”
(MODE 2) is shown on the display.
■ Memory presetting
1. Tune in the station to be stored.
2. Press and hold one of the memory
buttons (1, 2, 3, 4, 5) for about
2 seconds.
3 beeps can be heard.
88 I I
I I
0 Ш
__ Memory
channel
To recall a preset station
Press one of the memory buttons
(1,2, 3. 4, 5).
•Release the button within 2 seconds.
When using overseas
The allocation settings according to
the area are needed.
Every time the following procedure is
performed, the allocation setting
changes as follows:
FM 0.2 MHz, AM lOkHz^-
(original setting)
■ I
FM 0.1 MHz, AM 10 kHz
I
FM 0.05 MHz, AM 9 kHz -
■ How to adjust the alloca­
tion settings
1. Press and hold — MODE to select
the mode (MODE 1 or MODE 2).
2. While pressing ВАТТ CHECK,
press and hold * MODE for about
3 seconds,
•The changed allocation settings
(FM and then AM) will appear on
the display.
Note:
Converting the allocation erases the
stations previously stored in memory.
SOUND
XBS (RQ-E30V)
Boosts the low frequency range.
•If sound distortion occurs, turn down
the volume,
XBS (RQ-E30V) or VMSS (RQ-E35V)
does not function for AM reception. If
you press XBS (RQ-E30V)A/MSS
{RQ-E35V) during AM reception, “E" is
shown on the display.
(RQ-E30V) ^
(RQ-E35V)
-yi!s|-
VMSS (RQ-E35V)
. Boosts the low frequency range. Also,
the vibration of the earpieces of the in­
cluded headphones makes sound vig­
orous.
Raising the volume makes the VMSS
effect intensity.
•The effectiveness of VMSS depends
on the source.
•If you experience a ringing or dis­
comfort in your ear while listening in
VMSS mode, reduce volume or turn
the VMSS mode OFF.