Clarion FB275BTB - Manual (Page 29)

29
English
FB275BT / FB275BTB
Bluetooth
®
adjustment
2 - 1 .
Press the [ , ] button and select
“BLUETOOTH”.
3 - 1 . Push the [ ] knob.
3 - 2 . Press the [ , ] button to select the
“item name”.
ON : Welcome animation and screen wipe
transition at Source mode are enabled.
OFF : Animation effect is disabled.
Common Operations
Deleting a device
1. Select “DEL. DEV.”.
2. Turn the [ ] knob to select a device
to be deleted.
3. Push the [ ] knob. A delete con-
firmation is prompted.
4. Turn the [ ] knob to select “YES”
or “NO”.
5. Push the [ ] knob to confirm the
selection.
“ADD DEV.”
“EDIT DEV.”
“DEL. DEV.”
“AUTO CONN”
“MIC”
3 - 3 . Push or turn the [ ] knob de-
pends on selected item.
Adding a new device (Pairing mode)
1. Select “ADD DEV.”.
2. Push the [ ] knob.
∗ The “ ” indicator will be blinking. The display
shows “Pairing...” and the car stereo is currently
in Pairing mode.
Note:
The pairing timeout is 3 minutes.
Editing a device name
1. Select “EDIT DEV.”.
2. Turn the [ ] knob to select a
device name to be edited.
3. Push the [ ] knob.
∗ The display shows the device name.
Notes:
If there is no device connected, “( no devices)” will
be shown in the display.
“ All” option will be available if there is more than
one device connected.
Deleting pairing information in the main unit only
stops the unit from being connect to the other de-
vice. It does not stop the other device from trying
to connect to main unit. Please delete the pairing
information of the main unit from the phone/device
as well. Always make sure pairing information on
both device and main unit have been deleted before
starting a new pairing activity.
Deleting a device will disconnect any current
Bluetooth ® connection. User will need to manually
re-connect if necessary.
4. Turn the [ ] knob to edit a char-
acter.
5. Press the [ ] button or push [ ]
knob to go to next character. Press the [ ]
button to return to previous character.
6. Push the [ ] knob at the last blank
character to store the name.
Notes:
Push and hold the [ ] knob for 1.5
seconds or longer at any position will store the
name as well.
If there is no device connected, “( no devices)” will
be shown in the display.