Panasonic TC-25V50H EN - Manual (Page 21)

Remote Control Operatipn
10. TV/AV Selection Button
TV/AV
11. Direct Programme Number
Selection Buttons
Press the button to select the TV mode, AV1
mode, AV2 mode or AV3 mode.
--------------- (9
The sequence is as below
TC-25V50H
TC-2552G
TC-25V50R
TC-2550R
S-Video
Terminal
-►TV TV
__
T
A^1
T
A^1 AVI
o
A|^2 AV2
AV2 —
AV3
1
AV3
o
Note :
When TV mode is selected, the last Programme
Number, Sound System, Colour System,
Surround mode and Sound output (depending
on type of broadcasting transmission) mode
will appear.
When AV mode is selected, the last AV mode,
Colour System and Surround mode will appear.
If the S-Video cable is connected to S-Video
Terminal (for AV1, AV3), the selected AV
mode, S-Video symbol “ dr- ” (AVI, AV3) will
appear on the screen.
Press one of these buttons to select the
required Programme Number between
0 to 9.
12. Two Digit Programme Number
Selection Button
Press the button and following by the required
numbers to select Programme Number from
10 to 59.
e.g. To select Programme Number 12.
1. Press this button once.
2. Press button number" 1 ".
3. Press button number" 2 ”.
e.g. S-Video cable is connected to S-Video
terminal and AV1 is selected.
AVlfSr
AUTO
SURROUND OFF
V___________________y
o^