Panasonic CT-20G12 - Manual (Page 17)

Channel Caption
This feature allows you to enter the call names of up to 30
stations into memory (using up to 4 characters for each
station). The call name will then display along with the
channel number when changing channels or pressing
RECALL
Helpful Hints:
When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the caption
position.
CH 03
KXYZ
.Channel Caption
(Station Identifier)
o
1. Press .
2. Press or^^ and or to highlight the Channel
Caption Icon.
O)
3. Press action to display the Channel Caption Menu.
—
[GHANNElFGAKnONl
ENTER CHANNEL NUMBER
ENTER loeipucsis
rrGIMOyE
eURSOR
4.
6 .
Press or^, or use the Remote Control Keypad to
enter the channel number you wish to assign a Station
Identifier.
5. Press ^ to highlight ENTER CAPTION.
Press or ^ to select first character in Station
Identifier. Then press ^ to move cursor to the second
position and repeat until the complete Station Identifier
is entered (up to 4 characters).
Press A or to highlight ENTER CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).
O
8. Press
action
twice to exit menus.
NOTE: To delete a Channel Caption (Station Identifier) from
memory all four character positions in the “ENTER
CAPTION” area must display a dash mark (-).
7.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
O»
1. Press
action .
2. PressAor'^ and*^ or^to highlight theTimer Icon.
c:>
3. Press
action
to display the Timer Control Menu.
mMERlCONTRGL^
■SLELpStiMERM'^:NO;i^^^^
RROGRAM
\wm
(OTH C3G> g
OC3 g
8
@1F BB)
CHANNEL
4. Press ^ to select NO, 30, 60 or 90 minutes (Sleep
Timer wilt be activated).
CO
5. Press
action
twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through 4.
In step 4 select “NO” instead of minutes.
Helpfuimhts:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the status will display in the
bottom left corner.
-
17
-