Irregular pulse function – Panasonic EW3006 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653766/20/background.png)
Irregular pulse function
If the pulse rate varies by more than ±25% from the average while a
measurement Is being taken, when measurement Is completed the
mark will be displayed.
■ The
mark will lit after approx. 6 seconds of blinking when the
measurement Is completed.
If the LAViWt'M mark Is lit, please take the measurement again.
In some cases, if the pulse rate fluctuates greatly while a measurement is
being taken. It may be Impossible to obtain an accurate reading.
Fig. 9-a
Fig. 9-b
(Flashes.)
(Approx.
6 seconds.)
If you save a reading where an Irregular pulse was recorded, the
mark will be displayed when you recall that reading (Fig. 9-b).
If the
mark Is displayed an Irregular pulse rate Is detected, not
necessarily due to atrial fibrillation. However If this mark continues to
display, consult your physician.
* This function Is designed to act as a guide to help you to obtain accurate
readings (Please see pages 12-14).
Even if the
mark is not displayed, we recommend that you take
measurements 2-3 times, resting 5 minutes between measurements.
* If the
mark is frequently displayed, please consult a health
professional for your health condition.
Don’t try to interpret readings or attempt to treat any condition
yourseif.
Aiways foiiow the guidance of a heaith professionai.
19