Panasonic EW3006 - Manual (Page 19)

Movement detection function
If movement is detected while measurement is being carried out and more
pressure is applied by the pressure cuff, the mark will be displayed.
• Please carry out blood pressure measurement again if the mark
flashes or is lit.
• If the hand or wrist to which the pressure cuff is attached is moved while
measurement is being carried out (e.g. the wrist is moved suddenly), in
some cases correct measurements may not be obtained.
• When movement has been detected during measurement, the mark
flashes when the blood pressure reading obtained during that
measurement is displayed.
(If this reading is saved, the mark will flash whenever it is recalled.)
Movement Mark Explanation
mmHg
Flashing
(Ü
Movement has been detected.
■
The hand or wrist has been bent suddenly.
■ The muscles around hand or wrist have been tensed.
■ The hand or wrist has been moved, etc.
With correct posture, please take the measurement again after
measurement has been completed (see pages 12-14).
E
Lit
Movement has been detected that will significantly affect the reading.
' Significant movement has been detected.
' Movement has been detected repeatedly
• Significant hand or wrist movement has been detected, etc.
Please take the measurement again (An
E
will appear on the
display).
* An E will also appear on the display in the following cases:
■ When the pressure cuff hook-and-loop fastener has become
loose, etc.
(Please see page 25 tor further details.)
‘This function is designed to help you to take measurements accurately (see page 23).
Even if the Movement mark is not displayed, we recommend that measurements be taken
2-3 times in a comfortable position in order to obtain an accurate reading. Remember to
rest 5 minutes in between readings, (see pages 12-14 tor correct position).
18