To take up the leader tape, Press u/± stop/eject and load the tape, Press stop/eject and load the tape – Panasonic rx-ds28 User Manual
Page 14: Before
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

£
■ i
I
1
I
Leader tape
(Recording cannot be made.)
Before
recording
To take up the leader tape: □
Only normal tapes can be used.
The sound may not be recorded properly if high position tapes and
metal position tapes are used with this unit.
References
• Any changes made to the volume or sound quality during recording
will not affect the recording,
•
In order to prevent trouble caused by flat batteries, it is
recommended that you either supply power to the unit from the
household AC outlet or replace ail the batteries with new ones
when you are recording something which is important to you.
• The recording level is set automatically.
mm
If the unit is brought near a TV set during recording, noise may be
recorded due to the effects of the signals from the TV set. Maintain a
distance of at least 1.5 meters between the unit and a TV set.
To make a blank tape:
1. Load the recorded tape with the side to be erased facing upward,
2. Press izaa/oFF.
3. Press •
(He).
► PLAY is also depressed with '
Recording from radio broadcasts
Q
Press U/± STOP/EJECT and load the tape.
Load the tape with the side to be recorded facing upward.
Tune in the broadcast station.
(See page 9.)
Press • IREC) to start recording.
► PLAY is also depressed with •
To
Stop the recording:
Press
m/±
STOP/EJECT.
To stop the recording temporarily:
Press II PAUSE.
To resume recording, press II PAUSE again.
To reduce noise while recording an AM broadcast (Beat
proof function): B
Press FM MODE/BP when recording or in the recording standby mode.
Each time you press the button, "bPl" and "bP2" will be displayed
alternately. Select the position with the least noise.
Recording from CDs
□
Press STOP/EJECT and load the tape.
Load the tape with the side to be recorded facing upward.
Press ± CD OPEN and insert the CD.
Press QD, then press ■ CLEAR after the track
number has been dispiayed.
The total number of tracks and total play time of the CD are
displayed.
Press • [REC] to start recording.
► PLAY is also depressed with
CD play starts simultaneously.
To stop the recording:
Press ■ CLEAR and H/± STOP/EJECT.
Recording favourite tracks
Program desired tracks (refer to steps 2 to 4 on page 11) after
step 3.