Panasonic rx-ds28 User Manual
Panasonic, Rx-ds28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- □
- ® v_
- To turn off the unit:
- Turn down the volume and connect the headphones to the PHONES jack.
- Press BAND to select “FM” or “AM”.
- Press MEMORY.
- While “ I1^11 ” and the frequency are flashing: Press or to select the desired station.
- While “ ” and the preset channel number are
- n Press MEMORY.
- C] Repeat steps 2 to 6 to program other stations.
- 1. Select preset channel 3 (see page 9).
- 2. Press MEMORY twice (“BSQ" and the preset channel number flash).
- 3. While "IJdyir and the preset channel number are flashing:
- 4. Press MEMORY.
- Press TUNE MODE to display the preset indicator.
- Press -/K^ or +/»H to seiect the preset channel. Adjust the volume.
- Press BAND to select “FM” or “AM”.
- Press TUNE MODE to Clear the preset indicator.
- Press -/K^ or +/►►! to tune in the station. Adjust the volume.
- Automatic tuning:
- For FM reception:
- Example:
- Press ± CD OPEN, then insert the CD.
- Push the CD tray to close it.
- Press ^/11 to start play.
- Adjust the volume.
- To stop the disc:
- ESIl^Sj
- To prevent damage Q
- Press CD PLAY MODE before or during play. E3
- To repeat just one track:
- To repeat all tracks:
- To Start random play:
- Before operation:
- Press fan, then press ■ CLEAR after the track number has been displayed.
- Press or +/►►) to select the desired track.
- Press MEMORY.
- Press ►/ II,
- To cancel program play:
- When “—:—” appears: B
- When “FULL” appears: Q
- To check what has been programmed:
- Memory retention of programmed tracks:
- c
- Press B/^ STOP/EJECT, load the tape and close the lid. Press ► PLAY to start play.
- Adjust the volume.
- To fast-forward or rewind the tape Q
- Press REW/REV or ►► FF/CUE in the stop mode.
- rwri
- To find a particular spot on a tape □
- Press « REW/REV or ►► FF/CUE during playback.
- Press POWER BLASTER.
- To cancel POWER BLASTER function:
- Press XBS.
- B
- Press S.VIRTUALIZER to display the sound virtualizer indicator. * •
- To take up the leader tape: □
- Press U/± STOP/EJECT and load the tape.
- To reduce noise while recording an AM broadcast (Beat proof function): B
- Press STOP/EJECT and load the tape.
- Press QD, then press ■ CLEAR after the track number has been dispiayed.
- nBTfg
- ¥