Memo – Yamaha CDR-HD1500 User Manual

Page 43

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD

Adding track markers during recording (Manual track marking)

TRACK NO./BOOKMARK

О
О
Zl

This unil can automalically place track markers. However you can
also manually place hack markers during recording. (Manual track
marking)

Press TRACK NO./BOOKMARK (TRACK NO. WRITE on

the remote control) during your recording.

• A new track number is added at the location on the disc

corresponding to the time TRACK NO./BOOKMARK (TRACK
NO. WRITE on the remote control) is pressed.

• Manual track marking is possible after the recording has been

pert'ormed for

seconds from the beginning of the track, tind a

disc cannot contain more th:in 99 tracks. Even if there is time
remaining on the disc, further recording is impossible once 99
Inick markers have been pkiced.

Memo

' The track markers may not be placed properly even if the

recording has been performed in the synchroni/ed recording
according to the type of the source devices. To avoid this
problem, place the track markers matiually.

' Manual track marking is possible even during synchronized

recording.

' You can place the track markers to the tracks that have been

recorded on the HDD by dividing the track. For details, refer to
‘Track Divide" (P.62).