Adjusting the recording ievel – Yamaha CDR-HD1500 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD

Adjusting the recording ievel

There is an adjusting procedure for each input source to be recorded as explained below. Choose the one for your input source and follow' the
steps.

MULTI JOG

MENU

fo.'!o ■

SS3;.!#

Ó f: d O

ANALOG REC LEVEL

-MENU

-ENTER

When recording a digital input source

(OPTICAL, COAXIAL)___________________

The digital recording level is set to OdB, the level of the input
source, as an initial setting. Further adjustment is not normally
necessary. However it is possible to adjust the recording level to
suit your needs.

1 ■ Press MENU while this unit is in the HDD recording

standby mode (P.31).

The tbllowhig screen appears on the display.

1 .'! .'M I..É

Play the loudest passage (highest sound level) of the

source to be recorded.

Rotate the MULTI JOG knob (press +/-,

or ▼ on the

remote control) to adjust the recording level.

Adjustment is possible in the -l2dB to -f 12dB range by 0.4dB
steps.

Adjust the recording level so lhal the red part on the peak level
meter does not light at the loudest sound levels.

Press the MULTI JOG knob (ENTER on the remote

control) to return to the previous display.

: Memo

• The recording level can be adjusted while this

unit is in either the

recording or recording standby mode. Once recording has been
stopped, the recording level is reset to OdB.

• Adjustment of the recording level can be canceled by pressing

MENU when the level is adjusted in the recording standby mode.

• The recording level is set to OdB by pressing CLEAR when the

level is adjusted in the recording standby mode.

When recording an analog input source

(ANALOG)______________________________

■ Play the loudest passage (highest sound level) of the

source to be recorded.

2i Adjust the recording level by rotating the ANALOG

REC LEVEL control.

Rotate the control chrckwise to increase the level and
counterclockwise to decrease the level.

Adjust the recording level so Ural the red part on Ihe peak level
mcler does not lighi a1 the loudest soimrl levels.

: Memo

The recording level can he adjusted w'hile this unit is in either the
recording or recording standby mode.