Panasonic RAK-P001 - Manual (Page 10)

Panasonic SPECIAL FEATURES i
SIEEP/TIMER FUNCTION
Your remote is equipped and
programmed with a SLEEP/TiMER
function, separate from your TV
or for a TV not equipped with
SLEEP/TiMER.
1. press "TV" key.
m
ai
2. Press "set up"
key. Both the red
and the green lights
should be on.
3. Press "TV" key.
Only the red light
should be on.
4. Press
key.
■power"
5. Press numerical
keys 01-99 for the
desired number of
minutes.
Both the
red and the green
lights will blink.
(Example:
01=1
minute; 99=99
minutes)
10
6. Point the remote at your TV,
and ieave in that position. When
the programmed number of
minutes has elapsed, the remote
wili turn off your TV.**
NOTE; The remote can be used to
control all functions and devices
while in SLEEP/TIMER mode. To
cancel SLEEP/TIMER mode, repeat
steps 1-3. Enter the number 00
with the numerical keys to cancel
the SLEEP/TiMER mode.
**You must have your remote
pointed at your TV for
SLEEP/TIMER mode to work
properly.
MULTIPLE DEVICES
While In one mode, the remote
allows you to use some features
of your other components. The
following chart lists which
functions crossover to other
components.
CURRENT
MODE OTHER
MODE
CROSSOVER
FUNCTIONS
VCR, SAT
CBL TV Volume
Up/Down, Mute
TV, SAT
AUX
VCR Play, Pause. Stop
Fast Forward,
Rewind, Record,
TV/VCR