Panasonic KX TG2396B - Manual (Page 4)

3
\
Speed Dialer
AUTO®
PROGRAM ®
TALK
Indicator
fTAU^
Memory
Station
Numbers
3-A Storing Phone Numbers in Memory
You can store up to 10 phone numbers in the handset. The dialing buttons to (D) function as memory
stations. The TALK indicator light must be off before programming.
1
2
3
4
Press PROGRAM S.
• The TALK indicator flashes.
Enter a phone number up to 22 digits.
Press AUTO 0.
Press a memory station number
(® to d)).
• A beep sounds.
• To store other numbers, repeat steps 1 through 4,
If you misdial
Press PROGRAM ® to end storing. ^
♦ Start again from step 1.
To erase a stored number
Press PROGRAM @ ^ AUTO ® ^
^ the memory station number ([o] to (D)
for the phone number to be erased.
• A beep sounds.
i O O O ^
o o o :
Ì 0 0 0 1 00:0
- If a pause is required for dialing, press [PAUSE) where
needed. Pressing l^AUSEl counts as one digit (5-E).
3-B Dialing a Stored Number
Press (TALK] ^ AUTO 0 ^ the memory station number (® to (D).
• If your line has rotary or pulse service, any access numbers stored after pressing (TON^l will not be
dialed.
41 One-Touch Dialer
4-A Storing a Phone Number in the DIRECT Button
You can store a phone number in the [DIRECT] button. The
stored number is dialed with a one-touch operation.
The TALK indicator light must be off before programming.
PROGRAM® [DIRECT[ ^ PROGRAM ®.
• The TALK indicator flashes.
2. Enter a phone number up to 22
digits.
• If you misdial, press
PROGRAM 0, and start
again from step 1.
3. Press [DIRECT].
• A beep sounds.
If a pause is required for dialing, press [PAUSE] where
needed. Pressing [PAUSE] counts as one digit (5-E).
4-B Dialing a Stored Number in the DIRECT Button
Press [TALKI IDIRECT].
' If your line has rotary or pulse service, any access numbers
stored after pressing (TONE) will not be dialed.
• To erase a stored number;
Press PROGRAM @ ^ ] DIRECT],