Panasonic KX TG2396B - Manual (Page 3)

Getting Started
1-D Belt Clip
You can hang the handset on your belt or pocket using
the belt clip.
To attach the belt clip
1 -E Optional Headset
Plugging the optional headset into the handset allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA80 or KX-TCA90 headset.
To order, call the accessories telephone number in section 1-A.
Connecting the optional headset
open the headset jack cover, and connect the optional headset to the headset
jack as shown below.
When the optional headset is connected to the handset, be sure to use the
headset to talk with the caller, if you want to have a norma! cordless phone
conversation, disconnect the headset.
2| Making/Answering Calls
Section 2
2-A Making Calls
' For best operating performance, see
section 6-A.
Lighted handset keypad
(KX-TG2500 only)
The handset dialing buttons wilt light
when you press a button or lift the
handset off the base unit, and flash
when a call is received. The lights will
go out about 10 seconds after
pressing a button, lifting the handset
or answering a call.
1
2
3
Press ( talk ),
• The TALK indicator lights.
• If an alarm tone sounds, see 6-E.
Dial a telephone number.
To hang up,
press [TALKl or place the
handset on the base unit.
• The indicator light goes out.
To redial the last number dialed
Press [TALK] ^ [REDIAL).
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
Press ® or (5 while talking.
• Each time you press (5 or (▼)’ volume
level will change.
If noise interferes with the
conversation
Press [CHl to select a clearer channel or
move closer to the base unit.
2*B Answering Calls
If the handset is off the base unit,
press [TALK].
• You can also answer a call by pres^ng
any dialing button (o) to [9], ® or
(—Any Key Talk).
OR
If on the base unit,
just lift Up.
Selecting the ringer volume
The TALK indicator light must be off.
• To select HIGH (preset) or LOW,
press ® or s
Each time you press ® or the ringer
volume will change and the selected volume
will ring.
• To turn the ringer OFF,
press and hold until 2 beeps sound.
• To turn the ringer ON,
press ® or ®.
The ringer will sound at the LOW level.