Cable/ antenna connection, Cable connection, Antenna connection – Panasonic CT-32SX30 User Manual
Page 7: Cable / antenna connection, Cable preset
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
nstallation
Cable/ Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company to ANTI
connection on back of television. Select cable mode and ANT 1 in SET UP
menu under Prog Chan (Program Channels).
Note:
A cable converter box may be required for proper
reception. Check with your local cable company for
compatibility requirements.
Antenna Connection
•
For proper reception of VHF/UHF channels, an external
antenna is required. For best reception, an outdoor
antenna is recommended.
•
Connect home antenna to ANTI connection on back of
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna
Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV mode and
select ANTI in the Set Up Menu under Prog
Chan.
©