Panasonic CT-32SX30 - Manual (Page 14)

P icture in P icture
(PIP) O peration
Picture in Picture (PIP) Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch
two (2) live broadcasts at the same time with or without an external video source such as a
VCR, cable box, etc.
Basic PIP Operation
Procedure
Press the PIP button on the remote control to display the P/P frame onscreen.
Note:
The audio is from the Main Picture only,
1. Choose channels for the
PIP
frame by pressing the remote control PIP CHANNEL
up/down buttons.
2. Choose channels for the
Main Picture
by pressing the remote control CH up/down
buttons or by using the numeric keypad.
SWAP Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for
onscreen PIP and Main Picture source status.
PIP Operation with a Cable Box
Procedure
□ To view premium (scrambled) cable channels through your cable box in the
Main Picture:
Note:
Use this procedure if you want to watch premium cable channels in the Main
Picture while viewing a television program or video in the PIP
frame.
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune television to Channel 3.
3. Press the PIP button on the remote control to display the
PIP
frame onscreen.
Note:
The audio is from the Main Picture only.
4. Verify the cable box is ON.
5. Choose channels for the
Main Picture
by tuning the cable box.
6. Choose channels for the
PIP
frame by pressing the TV button on the remote control
and using the PIP CHANNEL up/down buttons.
Note:
Swap is not available when using the cable box to tune channels. If your
cable box has a video output, it can be connected to the television to allow
you to use all PIP functions. See the equipment manual for more information.
(Tune the PIP to the video input connected to the cable box).
m