ClearOne comm RAV 900 - Manual (Page 57)

Appendix — Serial Commands 109
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendix — Serial Commands 108
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
RFFREQ - RF Frequency Selection
This command sets/reports the frequency for the RF link to the Remote. The remote must be set to
the same setting.
ARGUMENT DETAILS
Name Type Size Values Units
Value Unsigned Integer 4 1 - 8
For Band 0,
1 = 904 MHz
2 = 907 MHz
3 = 910 MHz
4 = 913 MHz
5 = 916 MHz
6 = 919 MHz
7 = 922 MHz
8 = 926 MHz
For Band 1,
1 = 868 MHz
2 = 868.333 MHz
3 = 868.667 MHz
4 = 869 MHz
5 = 869.333 MHz
6 = 869.667 MHz
7 = 870 MHz
8 = 868 MHz
(Null to query in text)
BINARY FORM DETAILS
COMMAND ID: 58
NUMBER OF ARGUMENTS: 1
ARGUMENT FORM:
TEXT FORM DETAILS
COMMAND FORM: DEVICE RFFREQ [Value]
RING - Ring Indication
This command indicates a ringing line. This command is reportable only. It cannot be queried or set.
ARGUMENT DETAILS
Name Type Size Values Units
Channel Channel 1 See Group and Channels
Group Group 1 17 (R)
Value Unsigned Integer 2 0 = Ring cycle has stopped
1 = Ring cycle has begun
BINARY FORM DETAILS
COMMAND ID: 34
NUMBER OF ARGUMENTS: 1
ARGUMENT FORM:
TEXT FORM DETAILS
COMMAND FORM: DEVICE RING
REDIAL - Dial the last number again
This command redials the last number. There is no query for this command.
ARGUMENT DETAILS
Name Type Size Values Units
Channel Channel 1 See Group And Channels
Group Group 1 17 (R)
Reserved 2 0
BINARY FORM DETAILS
COMMAND ID: 45
NUMBER OF ARGUMENTS: 1
ARGUMENT FORM:
TEXT FORM DETAILS
COMMAND FORM: DEVICE REDIAL
RESET - Reset
Resets the unit. There is no query for this command.
ARGUMENT DETAILS
None
BINARY FORM DETAILS
COMMAND ID: 20
NUMBER OF ARGUMENTS: 1
ARGUMENT FORM: <0>
TEXT FORM DETAILS
COMMAND FORM: DEVICE RESET
RETURN VALUES
The box is reset and the boot up message is displayed.