Panasonic SX-MB100 - Manual (Page 32)

Error messages
Indication Contents
P LE A S E W A IT!
Appears when it takes some time to complete an
operation.
C O M P LE T E D !
Appears when an operation has been completed.
N O D IS C
You have attempted to play a CD in the CD &
KEYBOARD mode, but no CD is inserted.
S O R R Y !
During CD play, the instrument was jarred and sound
was interrupted.
F A ILE D , T R Y A G A IN
Appears when the CD tempo was unable to be
detected within a given time, and the instrument
automatically exits the CD tempo detect mode.
E R R O R !
Appears briefly when some other error is detected.
About the CD
n COMPACT
[
i
I
d
§(E
DIGITAL AUDIO
Use a CD which has this mark.
• Please do not use a CD with a heart or other
special mark, asdoing so may result in damage.
X
B To avoid injuring your CD, as weil as damag­
ing your instrument, please heed the following
points.
• Do not use a pencil or ball point pen to write on the CD.
• Do not wipe with record cleaner, thinner, benzene or alcohol.
It soiled, use a clean damp cloth to wipe it clean, and polish
it with a soft, dry cloth.
• Do not affix paper or stickers (decals). (Do not use a CD
from which cellophane tape or a glue-backed label has been
peeled off, as the residual glue may result in damage.)
• Do not insert more than one CD at a time.
• Be sure to remove the CD from the tray before
moving or tilting the instrument.
About the ANTI-SKIP SYSTEM
The ANTI-SKIP SYSTEM minimizes any interrup­
tion to the sound due to vibration by using pre­
sampled (up to 10 seconds) performance data.
• The ANTI-SKIP SYSTEM in this instrument is
always active whenever the power is on. (The
function cannot be disabled.)
• If the instrument is subjected to consecutive
shocks, “SORRY” may appear on the display
and the sound interrupted.
Note: The ANTI-SKIP SYSTEM in this instrument
uses digital compression technology.
32
QQTG0626