Troubleshooting, Display status before error symptom, Possible cause – Panasonic EW3152 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING
Display
Status before error
Symptom
value is high or low.
Measuiemenl values are dlAeienl
with each measurement
No display appears even when the
On/Off Start button Is pressed.
During pressurization, the sound or
Pressure cut comes of.
Instrument is broken.
PressurizallontomorelhanSSOmmHEwas
peribrmed.
mark E appeared.
The heart mark V hlinkedonlyalewtimesar
Cause and solution
Were measurements taken
according to the proper procedure
and in the correct posture?
Seep. 13 and 14.
Be sure your arm is properly
inserted iito the main unit
Seep. 13.
Possible cause
Value Is diterent from that measured
by Ire doctor.
When leOn/Ot Start buttons
pressed, the display disappears during
pressurizationmarkapears).
You moved or talked during measurements.
Your arm was not Inserted properiylnlolhemalnunlt.
Seep. 13 and 14.
. Relax Ibr 4 to 5 minutes and lake another measurement.
Seep. 14 and 17.
Batteries are Installed «ii the pdarilies wrong.
Seep. 11.
pressurization. This Is normal and Is not a maltrncllon.
Presstheringportlononiheoutsideoflheptessurecufintoihe
main body.
See p. 18.
“J!
►
►
Take it to the store where it was
purchased for testing and repairs.
26