To record your own message (marker message), To monitor the room sound, Marker message) – Panasonic KX-T4300BA User Manual
Page 41: M®® a®® a®® (hi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To record your own message
(Marker message)
You can leave your own message on the tape after listening to the last
message.
1. After 3 beeps indicating the end of the last message, wait for
10 seconds and start to speak your message when 2 beeps sound.
2. To finish recording, hang up.
From a touch tone phone
Advanced operation
To monitor the room sound
You can monitor the sound in the room where the base unit is
installed for 30 seconds.
m®®
a®®
a®®
(HI®®
Remote code no.
Call your unit and press the remote
code number during the greeting
message playback.
—After a long beep, short beeps
sound to indicate the number of
recorded messages.
Press “6” within 4 seconds after the
short beeps.
—The sound in the room is heard.
—To stop remote operation, hang up.
Note:
—When 30 seconds are up, a beep indicating that the time is up will
sound. To monitor further, press “6” again within 10 seconds after
the beep.