Panasonic KV-SS25U - Manual (Page 9)

Installing the Document Tray and the Exit Tray
1
2
3
Align both sides of the tray with the docu­
ment feed slot, then firmly insert the tray
into the slot using both hands until a "click"
IS heard
Caution '
Before installing the document tray, be sure
to perform the following procedure
® Connect the power cord
CD Turn the power switch on and initialize
the unit for approximately 1 5 seconds
Insert both ends of the exit tray into the
holes at the sides of the document exit slot
Remove the protective cover from the adhe­
sive strip on the exit tray sheet
Place the exit tray sheet into the rear of the
document exit area and attach to the exit
tray
□ □cument exit
slot
Exit tray sheet
Adhesive tape
(Opposite side
□f the exit tray
sheet)
Exit tray
Place the end of the exit tray sheet ("X"
marked area ) until touch the cabinet un­
der the document exit slot and attach to
the exit tray sheet
Removing the exit tray
Slightly bend the exit tray while pull­
ing It toward you, as shown in the
figure
Removing the document tray___________
Grasp the document tray as shown
in the figure, then lift slightly and
pull It toward you