Tuning procedure, Fast tune, Fine tuning – Panasonic TC-29R20 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^Tuning Procedure
3
r
NOTE:
1.
2
.
This Television has been factory tuned to all the major capital city
channels. Use this tuning procedure only if you wish to reset
individual Programme Numbers.
Switch on the TV set.
Press the PRE. (Preset) button until the on-screen display appears as shown:
Programme
Number (0 - 29)
as selected by you.
- 0
PRESET V
l
-
Tuning Indicator------------
1___
J
Band
Indicator
V
l
VHP Low Band
V
h
VHP High Band
U UHF Band
Press the Programme Up (A) or Programme Down ( v ) button to select the
required Programme Number.
Press the Volume Up {-»-) or Volume Down (-) button to tune to the next available
channel. As long as the button is pressed, the indicator will appear on the screen
showing that the TV is tuning.
When the picture is tuned to your satisfaction release the button.
Fast Tune
it is possible to increase the tuning speed by pressing the
TV/AV button at the same time. When nearing a broadcast station release the
TV/AV button and continue with normal tuning.
To tune more stations repeat steps 3 and 4 until all channels are tuned.
A maximum of 30 Programme Numbers (0 - 29) can be programmed.
Press the PRE. button 3 times to finish the tuning procedure. The picture will blank
momentarily.
Fine Tuning
Please refer to page 8 - "AFC (Automatic Frequency Control) Function".
J