Panasonic GENIUS 1100 NN-N688 - Manual (Page 13)

This feature allows you to program a standing time after cooking is completed and to program the oven as a minute
timer and/or to program delay start,
To Use as a Timer
A. Press Timer
Display counts down without oven operating. Five beeps will normally
sound at the end (see FUNCTION pad for options). MENU ACTION
MESSAGE Is "ENJOY YOUR MEAL”.
To Set Stand Time
Set Desired
Cooking
Program
e.g. High 12 min.
(See page 10)
000
Pmet ^ 000 ^
' 4
C/ock
^ 000 *
Start
□0D
Press
once.
Set desired
amount of stand
time using
number pads.
To Set Delay Time
Press.
Cooking will start. After
cooking, stand time will
count down without oven
operating.
Timer
Clock
Press
once.
000
000 _____
000
□00
Set desired
amount of stand
time using
number pads
Set Desired
Cooking
Program
e.g. High 12 min.
^ (See page 10 )
Start
Press.
After completed
delayed time, cooking
will start.
NOTE:
1. When the first/second stage has finished, a two beep signal is heard. After all the stages have been completed, the oven will
beep five times.
2 . If oven door is opened during the Stand Time of Kitchen Timer, the time in the Display Window will continue to count down.
3. Delay Start cannot be programmed before any Sensor Control Function. This is to prevent the starting temperature of the food
from rising before defrosting or cooking begins. A change in the starting temperature could cause inaccurate cooking results.
4. Timer can be set up to 99 minutes and 99 seconds.
- 1 1 -