Fabric ironing chart – Panasonic NI-636E User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FABRIC IRONING CHART
NOTES 1 Check garment for specific ironing instructions Always follow manufacturer's
instructions
2 Iron blended fabrics at setting for lower-temperature fiber or for the highest-
percentage fiber
3 Use caution, some synthetics may melt at high temperature
Temperature
Selector Setting
Fabric
Ironing Recommendations
1
ACRYLIC
• ACRIUN
•
CRESLAN
•
ORLON
ACETATE
METALLICS
SUEDE
Dry iron on wrong side, or use a press cloth on top
of fabric Don't sprinkle water directly on fabric to
avoid spots
To iron suede, cover ironing board with brown
paper and use it as a press cloth
2
NYLON
* ANTORON
♦CAPROLAN
SILK
Dry iron on wrong side
3
PERM PRESS
RAYONS
POLYESTER
* DACRON
•FORTREL
* KODEL
TRIACETATE
* ARNEL
Wn W COTTON
Dry iron on wrong side To touch-up collars, cuffs,
pockets, etc , iron lightly on right side
4
WOOL
VELVET
Steam ironing is suggested Never iron completely
dry To iron velvet, steam iron holding the iron
slightly above the fabric
5
COTTON
Steam ironing is suggested Spnnkle water on the
fabnc, depending on its thickness Iron dark fabncs
on wrong side to avoid unwanted sheen
6
LINEN
Steam ironing is suggested Iron dark fabncs on
wrong side to avoid unwanted sheen
* Trademarks of Fiber Manufacturers
- 9 -