Panasonic NI-636E User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO FILL
Make sure the iron is turned off and the AC power cord is unplugged from the electrical
outlet
The iron can be filled with the capsule tank in place or removed Confirm that the steam
button
IS
pressed to the dry ironing position(DOWN) when installing or removing the tank
1 With the iron sitting up on the heel rest, press the capsule locking knob down and
the tank will be released
2 Grasp the tank and lift it off the iron
NOTE Do not pull on or damage the rubber gasket
that joins the mam part of the iron with the
capsule tank
3 Open the water fill cover and fill the tank up to the max indication arrow on the Capsule
Tank
4 To re-install the capsule tank, set the tank onto the main body as shown in the
illustration and press into place until a click sound is heard
5 The water level can be observed through the transparent part of the tank, when iron is
placed either horizontally or vertically When the water level becomes tow, place the
iron vertically and add water, following the procedure described in 1 to 4 above
- 5 -