Panasonic KX-TCM424-W - Manual (Page 59)

General
Problem Remedy
The unit does not work. •Check the settings (p. 10-12).
•Charge the battery fully (p. 11).
•Clean the charge contacts and charge
again {p. 11).
• Install the battery properly (p. 53).
• Place the handset on the base unit
and unplug the AC adaptor to reset.
Plug in, then try again.
• Re-insert the handset battery within
5 minutes to avoid memory loss and
place the handset on the base unit.
Then try again.
You cannot program items
such as the time/day
adjustment {p. 15).
• Programming is not available while the
unit is in the talk, speakerphone or
intercom mode.
• Move closer to the base unit.
The ВАТТ LOW indicator
flashes or the unit beeps
intermittently.
•Charge the battery fully {p. 11).
You charged the battery fully,
but the ВАТТ LOW indicator .
flashes. •Clean the charge contacts and charge
again {p. 11).
• Install a new battery (p. 53).
The IN USE/CHARGE
indicator light never goes out
while charging.
•This is normal.
If you cannot solve your
problem. •Call our customer call center at
1-800-211-PANA(7262).
59