Pager call – Panasonic KX-TCM424-W User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pager Call
This feature allows you to alert your pager when the unit records an
incoming message. You can retrieve the message from a touch tone
telephone {p. 42). First store the pager number, then turn on the pager
call mode.
The TALK and DIGITAL SP-PHONE indicator lights must be off
before programming.
Storing the Pager Number
1
Press
[PROGRAM/2WAY REC).
•The TALK indicator flashes.
Press
(SCREEN/PLAYBACK).
•The indicator lights.
•“P” is displayed on the base unit.
Press
a) Enter your pager number and
then press
[REDIAL/PAU^
twice.*
(Enter the access code,
if required by your pager
company.)
b) Enter the call back number to
be displayed on the pager.
(Press @, if required by your
pager company.)
• If you misdial, press
[PROGRAM/2WAY REC] then
Start from step 1.
•You can enter a total of
48 digits.
When finished, press
i PROGRAM/2WAY RECl.
•The indicator lights go out.
ooo
OOo
Ooo
TALK Indicator
AUTO)
(PROGRAM/2WAY REC)
[SCREEN/PLAYBACK]
and Indicator
40
*Your pager company requires a delay after the pager number is dialed.
Contact your pager company regarding the required pause time.
Pressing
(REDIAL/PAUSE)
once creates a 3.5 second delay and counts
as one digit.