Setting the cpc, Function, Setting the greeting monitor function – Panasonic KX-TCM424-W User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the CPC
(Calling Party Control)
Function
The CPC function is preset to “A”. If you use a call waiting service, set to
“b”, or the cal! waiting tone will disconnect someone leaving a message.
1.
Press
[PROGRAM/2WAY~RE^.
2.
Press
[SCREEN/PLAYBACin.
3. Press®.
•The current setting, “A” or “b”, is displayed on the base unit.
4. To select “b", press [2].
OR
To select “A”, press (T).
•The setting is displayed.
5. When finished, press
(PROGRAM/
2
W^Y REC).
Setting the Greeting Monitor Function
When your greeting message is being played to the caller, you can also
listen to it through the speaker. To listen to your greeting, set to “2 (ON)”.
The factory preset is “1 (OFF)”.
1. Press
IPROGRAM/
2
WAY RECl
2.
Press
[
screen
/
playbaci
D.
3. Press®.
•The current setting, “1” or “2”, is displayed on the base unit.
4. To select “2 (ON)”, press ®.
OR
To select “1 (OFF)”, press ®.
•The setting is displayed.
5. When finished, press (
PROGRAM/
2
WAY REC).
19