Leica Geosystems Leica DISTO A8 User Manual

Page 11

Functions

Leica DISTO™ A8 1.1.0 gb

FIN

ROK

RUS

Indirect double tilt measurement - obtain all
detail information with 1 tilt measurement
and 1 distance measurement

See figure {N}
Press the INDIRECT MEASUREMENT - key {A, 12}
twice. In the symbol, the tilt to be measured is high-
lighted. Make the required tilt measurement with the
Digital Viewfinder. Here will we measure with the
DIST-key {A, 1}, a tilt and not the distance. In the
symbol, the distance to be measured is highlighted.
Make the distance measurement. The result is
displayed in the summary row, the measured
distance and angles in the secondary row. Press the
INDIRECT MEASUREMENT - key {A, 12} for a longer
period to obtain more details.
If the tilt of the distance measurement is above 0°,
the result is automatically displayed as a partial
height.

Indirect single Pythagorean measurement -
determine a stretch with 2 auxilliary measure-
ments

See figure {O}
Press the INDIRECT MEASUREMENT - key {A, 12}
three times. In the symbol, the distance to be
measured is highlighted. Make the required distance
measurements. The result is displayed int the
summary row. Press the INDIRECT MEASUREMENT -
key {A, 12} for a longer period to obtain more details.

Indirect double Pythagorean measurement -
determine a stretch with 3 auxilliary measure-
ments

See figure {N, P}
Press the INDIRECT MEASUREMENT - key {A, 12}
until the corresponding symbol is displayed. In the
symbol the distance to be measured is dark. Make the
required distance measurements. The result is
displayed int the summary row. Press the INDIRECT
MEASUREMENT - key {A, 12} for a longer period to
obtain more details.
You will find application examples with detailed
measuring sequences on our homepage
www.disto.com.

Storage of Constants/Historical
Storage

Storage of a Constant

It is possible to store and recall a frequently used
value e.g. height of a room. Measure the desired
distance, press and hold STORAGE - key {A, 7} until
the device beeps to confirm the storage.

Recalling the constant

Press STORAGE - key {A, 7} to recall the constant
and make it available with a press on the EQUAL - key
{A, 5} for further calculations.

Special function: Adjusting the constant
A measured value can be adjusted. If you press the
EQUAL - key {A, 5}, the value starts blinking and can